Hydrolock

Open Systems or Automatic Systems, choose a system card, and use the settings button to enter its cycle, run period, and PSI. Save the settings when finished.

Open Automatic Systems, select the season you want, then open a system's settings. Set the cycle and run period, expand Advanced Settings if needed, and select Save.

Watering frequency describes how quickly water is applied, usually in inches per hour. Use the sprinkler head manufacturer's rate or a measured value for your zone.

Play starts a system run and Pause stops or suspends it. Confirm that the correct zone is selected before starting a manual run.

PSI is water pressure in pounds per square inch. Correct pressure helps sprinkler heads spray evenly; too little or too much pressure can reduce coverage.

Check for clogged nozzles, damaged heads, blocked spray paths, low pressure, or incorrect spray arc settings. Clean and test the zone before changing its schedule.

Run a quick visual inspection monthly and after major weather events. Look for leaks, tilted heads, blocked nozzles, and areas that are too wet or too dry.

Advanced values are saved in this browser for the automatic systems page. Saving a value keeps it available after you reload the page on the same device and browser.